Aqara Presence Sensor FP2

Features

• Zone Positioning: It offers significant advantages over traditional PIR infrared motion sensors by using a single radar sensor to monitor rooms up to ca. 430 sq ft (ca. 40 m²)*.
• Multi-person Detection: Up to 5** target people can be detected simultaneously. The result is that, while dividing the space, it can also respond automatically according to the position of different people without interfering with each other.
• Ultra-High Precision: Privacy and detection accuracy are taken into consideration. It is capable of recognizing non-inductive signal detection without collecting real images.
• Control Other Devices via HomeKit, etc.:The FP2 is exposed as multiple sensors in HomeKit (and Home Assistant), Alexa and Google Home.****
• Fall Detection and Alerts***: When someone in a room falls, the FP2 can detect and notify you. It is made in the most private and convenient way possible, without the need to wear any devices or install a camera for constant monitoring.
• Built-in Light Sensor: Fully functional light detection sensor in the Aqara ecosystem.
• Local Automation & Flexible Installation Ways: After the setup is complete, the product runs locally. FP2's automation will still run as originally set if there is occasional Wi-Fi network instability.
• IPX5 and Hidden USB-C Port: Because of its IP rating, the sensor can also be installed in wet environments such as bathrooms.*****

In the box

• Presence sensor FP2 × 1
• USB-C to USB-A cable x 1
• Metal plate x 2
• Sticker x 2
• Screw kit x 1
• User manual × 1

* A recommended detection space is 10 m³ -40 m³.

** The best result can be achieved in the case of tracking not more than 3 persons.

*** Only ceiling placement is supported for fall detection. And fall detection can only identify most normal

fall scenarios and cannot be used as a substitute for medical equipment or vision. Currently, fall detection

cannot distinguish between slowly falling against a wall or passing out after sitting down.

**** Bluetooth is available for the future feature as Matter.

***** To use the sensor in a humid environment, the power adapter (USB-A) and the wall outlet should be waterproof